Trikker 2.0 for Mac: what the new version brings – and what PlanElec does in the browser
Trikker 2.0 has been out of beta since 13 November 2026 and runs on Windows and macOS. What is new, how to bring .trik files and Trikker PDFs across and plan in the browser – on Mac, PC and tablet.
Trikker 2.0 has been out of beta since 13 November 2026 and runs on Windows and, for the first time, on macOS. That is good news for electricians who work on a Mac; Trikker requires macOS 13 or later and a Mac with Apple silicon. PlanElec runs on the Mac with nothing to install, right in the browser. You open an existing .trik file for free in PlanElec Sketch, even without an account, and carry on drawing the single-line diagram and situation plan. If you need more, you plan in PlanElec Pro and open the same project on the Windows PC in the office or on a tablet on site; from a Trikker PDF, Pro recognises the floor plan and turns it into an editable project.
Who needs Sketch, and who needs Pro?
| Your task | Your route |
|---|---|
| Homeowner, DIY enthusiast or sole trader: draw the single-line diagram and situation plan for inspection, sale or a small job | PlanElec Sketch: free in the browser; no distribution board editor or self-check report |
| Electrical contractor, planner, integrator or solar installer: distribution board, self-check, dossier, PV, KNX or a team | PlanElec Pro: site pass per property or a subscription for ongoing projects and teamwork |
| Start with the drawing and later plan the whole installation | Sketch → Take it to Pro; transfer runs only from Sketch to Pro |

Trikker information last checked on 20 November 2026, PlanElec information as of 6 November 2026. Trikker information comes from the announcement of 13 November 2026, the beta announcement of 30 September 2026, the Trikker FAQ and two Trikker posts on the Schemalezer dated 13 October 2026 and 20 October 2026. On 20 November 2026 the Trikker homepage still mentioned the macOS beta; we follow the more recent announcement and the FAQ.
What is new in Trikker 2.0?
Trikker 2.0 is above all a new technical foundation. According to the developer, it represents more than a year of work.
| Change | What Trikker states | Status on 20 November 2026 |
|---|---|---|
| macOS | Trikker runs on the Mac for the first time, without Parallels or Boot Camp | Released; macOS 13 or later, only Macs with Apple silicon (M1 or newer) |
| Windows | Trikker 2.0 for Windows 10 and 11 | Released; the standard version per the FAQ |
| PDF export | Print output directly as PDF | Part of Trikker 2.0 |
| Web version (iPad/Android) | Per the announcement, a beta still in 2026; per the FAQ in autumn 2026 | Announced, no fixed date |
| Licences | Existing licences remain valid | Still per computer, per the FAQ |
The beta ran from 30 September 2026. Since 13 November 2026, Trikker 2.0 is no longer a beta according to the developer and is the standard version according to the FAQ. According to the announcement, your existing diagrams open in the new version as they are; Trikker recommends switching from earlier versions.
Since October 2026 there is also the Schemalezer (schema reader), a separate Trikker web tool, in beta: it reads the single-line diagram and situation plan from PDF, PNG or JPG, including scans, photos and hand sketches, and transfers them to Trikker. Since 20 October 2026 it also drafts a single-line diagram from a spoken or typed description of the installation. Access comes with an active Trikker licence; according to the developer, you check the results in Trikker.
Is Trikker now available for Mac?
Yes. Since Trikker 2.0 of 13 November 2026, Trikker runs on the Mac out of beta, without Parallels or Boot Camp. According to Trikker you need macOS 13 (Ventura) or later and a Mac with Apple silicon (M1 or newer); according to the FAQ, Macs with an Intel processor are not supported. Also keep the licence in mind: according to the FAQ, a Trikker licence works on one computer at a time. Working in parallel on a Mac in the office and a laptop on site means two licences.
If you only want to view or keep drawing a single Trikker file on your Mac, you do not need to install anything: PlanElec Sketch opens .trik files for free in the browser, without an account and on an Intel Mac too. You read the import report, carry on with the single-line diagram and situation plan and export both as a PDF. Without an account the PDF carries a logo watermark; with a free account it does not. The steps are in Import Trikker projects.
What about the browser, iPad or Android?
Trikker has announced a web version for browser and tablet: according to the announcement of 13 November 2026 as a beta later this year, according to the FAQ for autumn 2026, without a fixed date. Until then, the FAQ says Trikker runs only on tablets with Windows, not on an iPad.
PlanElec was built for the browser from day one – on a Mac, on Windows, on Linux or on a tablet. You open Sketch without signing in. With an account, your Sketch drawings and Pro projects live in the cloud and are up to date on every device; without Pro the Sketch cloud is limited, see the pricing page. No download, no update installer, no licence tied to a single computer.

Bring Trikker plans into PlanElec as PDFs
In PlanElec Pro you import one or many .trik files as projects; a signed-in account is enough, no subscription needed. The situation plan comes along into the floor plan: named floors, walls with their thickness, named rooms, doors with their swing, windows, garage doors and stairs, with placed devices linked to their circuit. The import report lists what is not carried over. Moving a whole archive is covered in Move a Trikker archive to PlanElec Pro. If you only have a plan as a PDF, PlanElec Pro reads it as a floor plan. This is how you get from a PDF to an editable floor plan:
- Save the plan with Trikker 2.0's direct PDF export.
- Add the PDF to the PlanElec project under Project files; scans and photos as PNG, JPEG or WebP work too.
- In the project file preview, start Recognise floor plan. PlanElec reads vector PDFs directly from their vector data and scans or photos with AI image recognition.
- Review the proposal: confirm the scale, compare rooms and areas and, in Correct draft, move corners or add and remove walls.
- Use Import to transfer it into an empty floor. The original page stays as an underlay; ⌘Z / Ctrl+Z reverses the import completely.
PlanElec transfers walls, rooms with their area, doors and windows, supported device symbols (socket outlet, double socket outlet, splash-proof socket outlet, switch, light point) and the scale. Symbols PlanElec cannot assign with confidence are marked and not transferred. You then plan circuits and the single-line diagram in PlanElec, with automatic planning and the PlanElec assistant. Import and calibrate a floor plan.
What you can plan with PlanElec Pro today
Mac support answers the platform question. In daily work, something else matters more: whether floor plan, circuits, distribution board and documents fit together without entering anything twice. That is exactly what PlanElec Pro is built for; Sketch deliberately stays with the single-line diagram and situation plan, without distribution board or self-check report. All product images in this article come from a fictitious example project in PlanElec Pro (captured on 15 October 2026).
One project, every plan
You draw the floor plan or place an image, PDF or DXF underneath. Rooms can start with a suggested set of devices. Switching chains, circuits, cables, phases and cable routes are suggested automatically, and you fine-tune them. The situation plan and single-line diagram come from the same model: change a circuit and it changes everywhere. See how automatic planning works.
The PlanElec assistant carries out requests
Open the PlanElec assistant with ⌘J / Ctrl+J and write what you need, for example "Place three socket outlets in the kitchen". The assistant works across the whole project: floor plan, rooms, devices, circuits, cables, distribution board, PV strings and lighting control. After every change, PlanElec checks the project with the AREI/RGIE self-check and flags new findings; you reverse any change with one click on Undo. Risky actions only run after Confirm and run. Technical questions are answered with verified sources. The language model runs in the EU region; the AI provider does not store your requests or use them for training. Activity and the assistant in the studio.
Solar PV, properly documented
In PlanElec, a PV system is more than an inverter symbol. You record strings, MPPTs, module type and count, DC protection and the DC cable run with cable type, cross-section, installation method and length. All of it appears automatically on the single-line diagram and the situation plan. If something is missing, PlanElec flags it straight away.

You place the modules themselves in energy mode, directly on the roof surface in the 3D view. PlanElec colours each module by its MPPT and checks every string against the module and inverter limits: open-circuit voltage in the cold, MPP voltage in the heat, currents and parallel strings. A string that does not fit stands out before it is on the roof.

The distribution board plans along
With Auto-Assign, you place protective devices on the DIN rails automatically, or drag them into position yourself. RCD groups, spare capacity and wiring stay visible, and PlanElec shows whether every circuit has been placed. The board becomes part of the design rather than a separate drawing. For existing installations, start from photos: under Cabinet photos, Detect modules recognises visible DIN modules with row, start position, width and type. You review the proposal and import it into an empty board; you complete the wiring, which a photo cannot show, in the planning.

From plan to complete dossier
Trikker 2.0 adds direct PDF export. PlanElec goes a step further: the single-line diagram, situation plan, distribution board and self-check report come together in one installation dossier with cover page, table of contents, page numbers, your company details and your logo. Before you generate it, PlanElec shows for each document what is still missing, so you can tell at a glance whether all information is complete. Every version is archived and gets a QR link. More about exports.

To see the result, open our pilot dossier as a PDF – a fictitious example exported straight from the product.
Working together on one project
Share projects by e-mail invitation with colleagues, designers or clients. Roles decide who edits and who only views. Live sync keeps open sessions aligned, including your own on Mac and tablet. Inviting other people is part of the subscription: three editing seats are included, and view-only access costs nothing. With "Try Pro" you plan on your own.
Sketch or Pro: what do you need on your Mac?
Both run in the browser. The task decides, not the operating system:
| Your task | The right route |
|---|---|
| Open a .trik file, keep drawing the single-line diagram and situation plan, export a PDF for the inspection | PlanElec Sketch, free, even without an account |
| Bring a whole Trikker archive across as projects | Import Trikker projects in Pro, with any signed-in account |
| Distribution board, self-check report, PV, building automation or teamwork | PlanElec Pro: Try Pro for 1 month: EUR 0, exports without masked areas, Site pass for EUR 15 per building or Pro for EUR 29 a month |
| Continue a Sketch drawing later with a distribution board | Take it to Pro; the route only runs from Sketch to Pro |
A subscription applies in Sketch and in Pro. The comparison of all three tools, with sources, is in Trikker, PlanElec Sketch or PlanElec Pro.
Native app or browser – which suits you?
| Criterion | Native app (Trikker 2.0) | Browser (PlanElec) |
|---|---|---|
| Installation | Download and install on each computer | None – a current browser is enough |
| Updates | Install the new version | Automatic the next time you open it |
| Multiple devices | One licence per computer in simultaneous use | One account, every device |
| Tablet | Web version announced as a beta for 2026; Windows tablets today | In the browser, today |
| Teamwork | Not described on the pages we checked | Pro: sharing with roles, live sync |
| AI assistant | Schemalezer (beta, web, with a Trikker licence): single-line diagram from a description or dictation | Pro: PlanElec assistant, every change checked and reversible |
| Plan from PDF/scan | Schemalezer (beta): diagram and situation plan from PDF, PNG or JPG | Pro: floor plan recognition, reviewed before import |
| Without internet | Can be used offline for a while | Internet connection required |
| Existing projects | Your Trikker files | Sketch: open a single .trik for free; Pro: import .trik files as projects, situation plan included, recognise the floor plan from a Trikker PDF |
If you often work offline or have many ongoing Trikker dossiers, the installed application serves you well. If you switch devices between office, site and client, want to work on a Mac without installing anything, or want to plan the board, PV and team in one project, you will find that in PlanElec in the browser. The Trikker information in this table comes from the announcement of 13 November 2026, the FAQ and the two Schemalezer posts, checked on 20 November 2026. For the detailed comparison including prices, see Trikker alternative PlanElec.
Frequently asked questions
Is Trikker 2.0 still a beta?
No. Since 13 November 2026, Trikker 2.0 is no longer a beta according to the developer and is the standard version for Windows and macOS according to the FAQ. The beta had started on 30 September 2026. The web version for browser and tablet has been announced but not yet released.
Can I open my Trikker projects in PlanElec?
Yes, in two ways. You open a single .trik file for free in PlanElec Sketch, even without an account, and keep drawing there. In PlanElec Pro you import one or many .trik files as projects with Import Trikker projects; a signed-in account is enough. The diagram, circuits and devices come along, and so does the situation plan with floors, walls and their thickness, rooms, doors, windows, garage doors and stairs. The import report lists what is not carried over. If you only have a plan as a PDF, start Recognise floor plan in PlanElec Pro, review and import. Finish ongoing dossiers in Trikker.
How much does PlanElec cost?
PlanElec Sketch is free, even without an account. For Pro there is Try Pro for 1 month: EUR 0, exports without masked areas, Site pass for EUR 15 per building, paid once, and Pro for EUR 29 a month or EUR 290 a year. Pro includes three editing seats; each additional seat costs EUR 12 a month or EUR 120 a year, and view-only access costs nothing. A subscription applies in Sketch and in Pro. Details are on the pricing page.
Do I need a Mac or Windows?
Neither. Sketch and Pro run in any current browser on macOS, Windows and Linux. All you need is an internet connection.
Does PlanElec replace the official inspection?
No – the roles are clearly split. The AREI/RGIE self-check in Pro, which also checks every assistant change, shows you the gaps before hand-over; it is not a certificate of conformity. The official inspection is carried out by an accredited inspection body.
Try it on your Mac now
Open a .trik file or a blank drawing in PlanElec Sketch: free, in the browser, nothing to install. If you need a distribution board, self-check report, PV or teamwork, create a small project in PlanElec Pro: have a Trikker PDF recognised or draw the floor plan, place sockets and lighting or ask the assistant to do it, check circuits and the board, export the dossier. Your own project shows whether PlanElec fits the way you work – on the device in front of you.
Which next step fits your task?
- For your own documents and small drawing jobs: Draw the single-line diagram and situation plan in Sketch for free.
- For professional planning and your business: Explore PlanElec Pro · Try Pro for 1 month and compare plans.
Try Pro for 1 month: for one person, without payment details or an automatic switch to a subscription. With a valid VAT number you start immediately; without one you request approval. The trial includes exports without masked areas; a confirmed account is required.
Keep working on your Trikker file in Sketch
In PlanElec Sketch, open an existing .trik file via ‘New’. Sketch converts it into a drawing and shows you an import report.
Fictitious sample dossier, available without sign-up.